Recent Q&A

• Toggler for TV mount

  Hi All, Decided to go to the toggler route. Seems a like quicker and doing the wood pieces and cutting a notch and then securing it seemed a lot more…

• Screws for wood to metal, metal to wood

  What kind of screws would you use that can easily get from big box store like HD to screw a wood stud into a metal stud if you start with…

• small framing question for tv mount

  Just opened up my walls and realized the steel studs are 24 OC and the stud wall is about 2 inches wide only plus sheetrock making it 4 inches.The tv…

• Low pressure kitchen faucet

  我们的厨房faucet is still low pressure after the reno and I removed the restrictor at the spray too.is the way he designed and did the installation with the pipping…

• Kitchen Faucet Lower Pressure After Construction

  Redid our whole kitchen in a condo we just purchased and have the following installed that are connected to the kitchen water valves (faucet, d/w, water supply for fridges (water…

• Plumbing Problem

  Recently had a contractor come in and redo the bathroom. We picked out this Riobel shower set shower valve and rough in. It seems to lose all its pressure when I…

• Ultra-Thin Leveling Clips

  Hi All, Has anyone ever used 1/32 leveling clips or even thinner? I see mostly HD carries 1/16. I want our GC to use leveling since most of the chinese…

• Beam Angle

  Does Beam angle for recessed lighting matter much when the ceiling height is 8 foot only and, both the same lumens, and the lights are only 4 feet apt anyways…

• Determining Lumens

  Were gut renovating and some people say our liughting is not enough and then there are those who say its overkill. What does the GBA community think? The location of…

• Recessed vs. Regressed Light Fixtures

  Not sure pros and cons of each but my wife and I are stuck between these 2. Seem like the only difference is the recessed vs regressed portion. Is there…