OK this keeps resurfacing so I thought I would see what others have come up with. When using metal siding (corrugated or sim.) dealing with the window head always seems…
Has anyone done this/have a detail/masonry clip supplier for installing stone over a continuous 3" exterior insulation system (2x6 w sheathing) load bearing wall ? I am in climate zone…
I am considering using insulated "Zip System R-sheathing" on a project to save some labor$$. From a building science standpoint I am somewhat unsure. I am in Zone 7. Ideally,…
Performing a remodel/energy bolster on an older 700 sf house. I don't want to go through the trouble of a whole house balance vent system. I am considering a bathroom…
Have a square face (6"x6") existing chinked square timber cabin. (Much to my surprise, it had T-111 over it). Climate zone 7, dry, cold, high rocky mountains (7000ft). My original…
Does anyone have a recommendation for fasteners for exterior foam application? I am applying 6-7" of exterior EPS foam in two layers (2x3", overlapping joints). Ideally I am looking for…
I have a passive house project in the Colorado Rockies and need heaps of insulation to make the numbers work (R-90 walls, R-120 roof). A local supplier has polyurethane SIPs…
Recent Q&A
金属壁板- window head flashing detail
OK this keeps resurfacing so I thought I would see what others have come up with. When using metal siding (corrugated or sim.) dealing with the window head always seems…
Stone (not veneer) over 3″ rigid continuous exterior insulation
Has anyone done this/have a detail/masonry clip supplier for installing stone over a continuous 3" exterior insulation system (2x6 w sheathing) load bearing wall ? I am in climate zone…
Low slope residential roof vent question
Climate zone 7, lots of snow (high rockies) Is it worth venting over the top of the sheathing to prevent ice damming on a 60' long metal roof with a…
Zip wall insulation ratio question
I am considering using insulated "Zip System R-sheathing" on a project to save some labor$$. From a building science standpoint I am somewhat unsure. I am in Zone 7. Ideally,…
Bathroom vent fan with ERV/HRV in older house that isn’t the tightest.
Performing a remodel/energy bolster on an older 700 sf house. I don't want to go through the trouble of a whole house balance vent system. I am considering a bathroom…
Square timber cabin “efficiency update”
Have a square face (6"x6") existing chinked square timber cabin. (Much to my surprise, it had T-111 over it). Climate zone 7, dry, cold, high rocky mountains (7000ft). My original…
Exterior EPS foam fasteners?
Does anyone have a recommendation for fasteners for exterior foam application? I am applying 6-7" of exterior EPS foam in two layers (2x3", overlapping joints). Ideally I am looking for…
Input on Triangle Tube boiler products
Does anyone have any experiences, positive or negative, regarding Triangle Tube boilers? Thanks.
Insulated fire rated garage man door?
Does anyone have a source for a good insulated 20 min rated door (for garage access from a residence)?
Stacking SIPs and nailbase for superinsulation
I have a passive house project in the Colorado Rockies and need heaps of insulation to make the numbers work (R-90 walls, R-120 roof). A local supplier has polyurethane SIPs…